Note: This is a project under development. The articles on this wiki are just being initiated and broadly incomplete. You can Help creating new pages.
Difference between revisions of "Mṛdvīkādi leha"
m (Prabhakar moved page Mrdveekaadi leha to Mṛdvīkādi leha) |
|
(No difference)
|
Revision as of 14:23, 20 August 2018
Mrdvekaadi leha is a semisolid avaleha preparation made with the ingredients in the Formulation composition given below.
Contents
Formulation composition
M¨dvīkā (Drāk¾ā API) | Vitis vinifera Dr. | Fr. | 50 in number |
Pippalī API | Piper longum | Fr. | 30 in number |
Śarkarā API | Sugar | 48 g | |
Madhu API | Honey | Q.S. |
Method of preparation
- Take all ingredients of pharmacopoeial quality.
- Wash the M¨dvīkā two or three times with fresh water, till it becomes clean, and drain the water completely. Remove the seeds and crush to a fine paste.
- Powder dried Pippalī and Śarkarā separately and pass through sieve No. 85.
- Triturate all the ingredients of the composition to a homogeneous mixture by adding required amount of Madhu, to form a semisolid mass.
- Pack it in tightly closed containers to protect from light and moisture.[1]
Description
- Dark brown coloured, semi solid, malleable, sticky preparation with a pungent, slightly sweet and sour taste.
Storage
- Store in a cool place in tightly closed containers, protected from light and moisture.
Therapeutic uses
- Kāsa (cough).
Dose
- 25 g daily in divided doses.
Anupāna
- Water, Milk.
Physico-chemical parameters
Loss on drying | Not more than 32.0 per cent |
Total ash | Not more than 1.0 per cent |
Acid-insoluble ash | Not more than 0.2 per cent |
Alcohol-soluble extractive | Not less than 30.0 per cent |
Water-soluble extractive | Not less than 90.0 per cent |
pH (1% aqueous solution) | 4.0 to 4.3 |
Total tannins | 0.4 to 0.56 per cent |
Total phenolics | 0.7 to 0.8 per cent |
Total sugar | 70 to 73 per cent |
Reducing sugars | 50 to 51 per cent |
Non-reducing sugars | 20 to 23 per cent |
References
- ↑ THE AYURVEDIC PHARMACOPOEIA OF INDIA, PART-II, VOLUME-1, page no 24 .