Note: This is a project under development. The articles on this wiki are just being initiated and broadly incomplete. You can Help creating new pages.

Nimbādi Cūrṇa

From Ayurwiki
Revision as of 13:06, 14 August 2018 by Prabhakar (talk | contribs)
Jump to: navigation, search
Help icon-72a7cf.svg This page is a stub. Learn how you can help expanding it.

Nimbaadi Churna is a powder preparation made with the ingredients in the Formulation composition given below:

Formulation composition

Method of preparation

  • Roast coarsely powdered Saindhava lava´a (number 15) in a stainless steel pan at a low temperature till it becomes free from moisture. Prepare fine powder and pass through sieve number 85.
  • Clean, dry and powder the other ingredients 1 to 21 (except number 15) individually in a pulverizer and sift through sieve number 85 mesh separately.
  • Weigh separately each ingredient, mix together in specified ratio and pass through sieve number 44 to obtain a homogeneous blend.
  • Pack it in tightly closed containers to protect from light and moisture.[1]

Description

  • Yellowish brown, smooth powder, taste bitter, salty and odour pungent. The powder completely pass on through sieve number 44 and not less than 50 per cent pass on through sieve number 85.

Storage

  • Store in a cool place in tightly closed containers, protected from light and moisture.

Therapeutic uses

  • Udara (diseases of abdomen); Āmavāta (Rheumatism); Vātarakta (Gout); Kushtha (diseases of skin).

Dose

  • 5 g daily in divided dose.

Anupāna

  • Gudūcī kvātha, Warm water.

Physico-chemical parameters

Loss on drying Not more than 8 per cent
Total ash Not more than 12 per cent
Acid-insoluble ash Not more than 10 per cent
Alcohol-soluble extractive Not less than 18 per cent
Water-soluble extractive Not less than 23 per cent
pH (1% aqueous solution) 4 to 5

References

  1. THE AYURVEDIC PHARMACOPOEIA OF INDIA, PART-II, VOLUME-1, page no 52.

Loss on drying at 1050

Not more than 8 per cent, Appendix 2.2.10.

Total ash: Not more than 12 per cent, Appendix 2.2.3. Acid-insoluble ash: Not more than 10 per cent, Appendix 2.2.4. Alcohol-soluble extractive: Not less than 18 per cent, Appendix 2.2.7. Water-soluble extractive: Not less than 23 per cent, Appendix 2.2.8. pH (10% aqueous solution): 4 to 5,